Ghost 2 Immobiliser Reviews
The ghost 2 immobiliser is a cutting-edge anti-theft system that uses modern technology to ward off car theft. This hidden device is not noticed by thieves, and it only starts the engine when a pin or app is entered.
It's weatherproof and connects to the CAN data network of your vehicle. It also comes with the service/valet mode that allows you to start your car temporarily while it's in garage for cleaning or servicing.
Easy to install
The Ghost immobiliser is a cutting-edge security tool that safeguards your vehicle from cloning, hacking and key theft. It utilizes a PIN code system that is integrated into your car's electronic control unit, making it hard for thieves to detect. Unlike traditional immobilisers, it does not require any special keys or sensors, and is completely hidden from view without any LED indicators or signals to give away its presence. It's also cheaper than replacing an ECU or installing a key fob. It can even lower the cost of insurance.
When installing a Ghost 2 immobiliser, be sure to follow the manufacturer's directions carefully. This will ensure that the device operates properly and efficiently. Once the installation is complete, test the system by entering the PIN code and then starting the engine. Regular testing will help you spot any issues before they become worse.
Make sure you check the position of the CAN H and CAN L wires prior to starting the installation. These are crucial to powering the immobiliser, therefore it is important to ensure that they are connected correctly. It is also a good idea to label the wires to make it easier to locate them during the installation process. Once you've identified the locations of these wires, connect them to a constant 12V power source as well as the grounding point. Use web link to shield the connections against damage or short-circuits.
After connecting the wires, tidy the wires with cable ties to prevent potential alteration. It is also recommended to cover the wires with insulation tape or heat shrink tubing. This will help protect them from electrical shorts and increase the lifespan of the device. Once the wiring is secure, it's a good idea to test the Ghost 2 immobiliser.
In the event that you have to surrender your vehicle, for instance for servicing or valet parking for valet parking, the Ghost 2 immobiliser has a service mode that temporarily disables the PIN code sequence. Press the brake pedal, and hold the accelerator down for a period of time equal to the number one in the emergency code. The system will then enter service mode, which can be verified by flashing the indication signal five times.
It is simple to change PIN codes
It is simple to safeguard your vehicle from theft with an immobiliser ghost 2. It is concealed inside the vehicle and is able to be accessed with a special code. The device connects directly to the vehicle ECU through its data bus, and does not rely on radio frequency signals as do traditional Thatcham immobilisers or aftermarket alarm systems. This makes it difficult for thieves to discern the sound of an immobiliser relay or add new key fobs. The control unit is hidden in the wiring harness or dashboard and cannot be physically tampered with to reset the system.
The ghost 2 immobiliser is connected to your vehicle's CAN Data network. It uses buttons on the door panels, steering wheel and the centre console to create a programmable sequence of up to twenty button presses that must be entered to start the engine - just as a PIN code. This unique next generation system does not require cutting of wires when it is installed and can be fully reprogrammed at any time. You can even put your vehicle in Valet or Service mode to allow it to start temporarily when giving it to a mechanic for work.
The app can also be used to block your PIN code if you've lost your keys, or change it. This feature is especially useful when you've given your car away to someone else to use for parking or valet service. It prevents them from starting the car and then driving it off without your permission. It is also undetectable to professional thieves because it does not make use of radio frequencies or circuits.
The ability of the immobiliser to prevent relay thefts is another important feature. Relay theft is a popular method of car theft where criminals hack into your car's diagnostic port and alter the original signal sent by the key to the vehicle's ECU in order to fool it into believing that there is a valid key. This is how traditional immobilisers can be removed, however with an immobiliser that is ghost 2, the signal is delayed before it reaches the ECU.
Simple to use app
Ghost 2 is an immobiliser that is revolutionary. It protects your vehicle from key-cloning. It connects to the CAN data network of your vehicle and requires a PIN code in order to start the engine. It also prevents thieves using signal spoofing or device spoofing which are common techniques used to steal vehicles.
The system is easy to use and functions as a standard auto alarm. The installation of the system allows you to create a unique 20-digit pin code that you must enter before starting the vehicle. This will stop your vehicle from being stolen, even when you lose your keys. You can disable the system by downloading an app for your smartphone.
The ghost is quiet, and it does emit radio frequency signals. It is a discrete weatherproof device that can be mounted anywhere in your vehicle. It can be concealed beneath the dash, steering wheel, or even the door panels. It communicates with your ECU through the CAN data circuit, and is not affected by diagnostic tools that thieves use to find security systems. It is also not affected by jamming devices which spoof codes.
It is a hidden installation that doesn't require any wire cutting or modifications to the car, and it can be utilized as an anti-theft system for all cars. Its technology has been proven to be efficient, and it's in compliance with TASSA Standards. The Ghost is a great option for classic, sports, and prestige automobiles. It can also be used as a way to protect vehicles being hired on websites like Turo.
The Autowatch Ghost 2 is the next generation of car immobilisers. The system is inaccessible to thieves and stops them from starting your vehicle without a PIN or are authorized by the app. It doesn't emit radio frequencies or any other signals scanners could detect. The process of installing the app is simple and quick. The app is simple to navigate and offers a user-friendly interface which makes it easy to configure and use. It also comes with a GPS tracker that will help police locate the vehicle and recover it.
Easy to reset
It is possible to safeguard your vehicle from theft by using a ghost 2 immobiliser. It is integrated into your vehicle's ECU creating a wall that thieves can't breach without the correct pin. The device is also TASSA-certified which means it is acknowledged by insurance companies. It's a great device to prevent car theft, and it can save you a lot of money over the long term.
The Ghost system, unlike traditional alarm/immobilisers which require cutting of circuits it is directly connected to your vehicle's CAN data network. It operates through the buttons on your dashboard and the steering wheel. You can design a unique PIN that is up 20 presses long. The PIN has to be entered before the engine can start as it would be the PIN you use on your credit card. The Ghost system is invisible to thieves and there aren't LEDs to indicate its presence. This makes it the most efficient aftermarket CAN-bus immobiliser available today.
The Ghost system also has a benefit that it doesn't transmit radio frequency signals. This means that it cannot be detected by thieves or snatched up. This prevents key attacks that replicate and relay attacks as well as the common method of hacking into the computer system of a car using its CAN bus scanning for signals. The Ghost system is designed so that it is able to be hidden within your vehicle. There are no lights, or other indicators to show its presence.
The system also has the option of a Transport Mode that disables the Ghost system, which is useful for situations where you need to temporarily disable it, like when you are traveling or performing maintenance. However, this mode is not as efficient as Service Mode, as it does not disable the system if your vehicle is traveling over 31 mph for more than 15 minutes.
To reset your ghost 2 immobiliser, you'll need the emergency code, which you can obtain from your installer. It is usually hidden under a scratch-off section on the card that was included with the installation. This emergency code should be kept safe and kept in a safe place like an at-home wallet.